{"id":305,"date":"2021-02-23T09:54:01","date_gmt":"2021-02-23T09:54:01","guid":{"rendered":"http:\/\/pscsolaruk.com\/blog\/?p=305"},"modified":"2021-02-23T09:54:01","modified_gmt":"2021-02-23T09:54:01","slug":"novel-two-polymer-membrane-boosts-hydrogen-fuel-cell-performance","status":"publish","type":"post","link":"https:\/\/pscsolaruk.com\/blog\/novel-two-polymer-membrane-boosts-hydrogen-fuel-cell-performance\/","title":{"rendered":"Novel two-polymer membrane boosts hydrogen fuel cell performance"},"content":{"rendered":"

A considerable portion of the efforts to realize a sustainable world has gone into developing hydrogen fuel cells so that a hydrogen economy can be achieved. Fuel cells have distinctive advantages: high energy-conversion efficiencies (up to 70%) and a clean by-product, water.<\/p>

Advertisements<\/div>

\"\"<\/a><\/p><\/div>\n

In the past decade, anion exchange membrane fuel cells (AEMFC), which convert chemical energy<\/a> to electrical energy via the transport of negatively charged ions (anions) through a membrane, have received attention due to their low-cost and relative environment friendliness compared to other types of fuel cells.<\/p>\n

But while inexpensive, AEMFCs suffer from several major drawbacks such as low ion conductivity, low chemical stability of the membrane, and an overall lower performance rate than their counterparts. Now, in a study published in the Journal of Materials Chemistry A, scientists from Korea report a novel membrane that is both thin and strong and takes care of these drawbacks.<\/p>

Advertisements<\/div>

\"\"<\/a><\/p><\/div>\n

To develop their membrane, the scientists used a novel method: they chemically bonded two commercially available polymers, poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) and poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) without using a crosslinking agent.<\/p>\n

Professor Tae-Hyun Kim from Incheon National University, who led the study, explains, “A previous study made a similar attempt to fabricate anion exchange membranes (AEMs) by crosslinking PPO and SEBS with diamine as a crosslinking agent. While the AEMs displayed excellent mechanical stability, the use of diamine could have led to different reactions other than those between PPO and SEBS, which made it difficult to control the properties of the resultant membrane.<\/p>

Advertisements<\/div>

\"\"<\/a><\/p><\/div>\n

Therefore, in our study, we crosslinked PPO and SEBS without any crosslinking agent to ensure that only PPO and SEBS react with each other.” The strategy used by Prof. Kim’s team also involved adding a compound called triazole to PPO to increase the membrane’s ion conductivity.<\/p>\n

Membranes fabricated using this method were up to 10 um thin and had excellent mechanical strength, chemical stability, and conductivity at even 95% room humidity. Together, these conferred a high overall performance to the membrane and to the corresponding fuel cell on which the scientists tested their membrane. When operated at 60C, this fuel cell exhibited stable performance for 300 hours with a maximum power density surpassing those of existing commercial AEMs and matching cutting-edge ones.<\/p>

Advertisements<\/div>